The hat of the nurse look good proper? and right here straightforward method and procedures on “how to sew a nurse hat”. To do this, one want to have the next instrument and supplies;

Instruments wanted: Stitching machine, Rotary cutter, Ruler, Reducing mat, Pins, Scissors, Material glue.

Supplies wanted: 1/3 yard white cloth, 2/3 yard heavyweight iron-on fusible interfacing, White thread, Crimson felt and Skinny elastic (elective).

Steps On how to sew a nurse hat

1. Put together the Fundamental Items

Lower the fusible interfacing into two 12-by-20-inch items. Iron them to the again of the white cloth.

Subsequent, reduce two rectangles of the white cloth measuring 11 by 19 inches every. Lower a 5-by-7-inch rectangle out of the 2 decrease corners of every piece. The 7-inch facet must be alongside the lengthy fringe of the rectangle. (In case you are making this hat for an 18-inch doll, reduce 5-by-8.5-inch rectangles. After which reduce 2.25-by-3-inch rectangles from the corners.)

Sew round all the edges with a 1/4-inch seam allowance, leaving a 3-inch opening on the underside of the “T” form. Then, clip the corners.

2. High Sew and Press the Nurse’s Hat

Flip the hat proper facet out, and roll the seams between your fingers to open them. Iron the hat, together with the opening, ensuring the seam allowance is pressed in evenly.

High sew across the edges with a 1/8-inch allowance.

Then, fold the “T” edge up, so the horizontal edges are 1 inch beneath the lengthy edge. Press with an iron.

3. Sew the Again of the Nurse’s Hat

Fold a small pleat within the “T” form, and sew it with a horizontal line.

Carry the within corners of the lengthy edges to the again of the hat. Pin them in place at a slight angle close to the underside and the pleat. Sew the corners with small vertical strains.

Add a Crimson Cross to End the Nurse’s Hat

Lower a 2-inch sq. of purple felt, and reduce a 1/2-inch sq. out of every nook to make a cross. Connect the cross to the entrance of the hat with cloth glue. (In case you are making a doll hat, begin with a 1-inch sq., and reduce out 1/4-inch squares from the corners.)

NOTE:  For those who’re making this for a baby’s costume or a doll, or for those who simply need to skip the effort of hairpins, add a skinny elastic chin strap. Put the hat in place, and measure the elastic primarily based on the top measurement of who will probably be carrying it, slicing it a little shorter so it could possibly stretch when worn. Sew the ends to the edges of the hat.